Additional Specs, Equipment and Information:

Boat Name
Taniwha

Specs
Keel: Centerboard
 

Sails
Three Mainsails- New 3Di 870 (carbon/dyneema) North Sails, excellent condition Smyth cruising/delivery main carbon w/taffeta, fair condition Smyth carbon laminate
Three Jibs - 1.  New 3Di 870 (carbon/dyneema) North Sails, excellent condition; 2. Smyth cruising/delivery carbon jib w/taffeta, fair condition;  3. Smyth carbon laminate
Two Screachers - 1. New 3Di 870 (carbon/dyneema) North Sails 2. Smyth carbon laminate air condition
One Maxi Reacher – New North Sails CZ30 material, very fast reaching/downwind sail
Two Spinnakers – 1 big, 1 small, both set up to be used with top-down furler; both by Smyth Sails
Rigging and sail handling gear
Marstrom Carbon Mast- double spreader allows for positive jib roach profile while still achieving tight sheeting angle for maximum upwind performance

Forte Carbon Boom- Main + Jib sheets exit on the boom
Farrier built C-Foils- add performance and safety on all points of sail at over 10kts boat speed
Farrier built Carbon Rudders- twin rudders for added performance and safety
Hydraulic Canting Rig- single ram in center of boat drives both shrouds
Constrictor Clutch System in line with shrouds for safety, redundancy + leeward shroud tensioning
Hydraulic Headstay- enables mast to be moved fore + aft for perfect rig balance with all sail combos, easy to use on the fly
Custom curved Harken main traveler allows full range w/o changing mainsheet tension
Custom curved Harken self-tacking jib track, jib easily switches sides in the tacks
Adjustable Screecher leads- purchase lead under cockpit seats with floating lead thru the deck
Barber hauler system set up to both haul screecher lead outboard and spin lead forward
Mast rotation controls, positive rotators both sides and rotation limiter
Upgraded Harken 46 winches- makes for easy sail handling under load
2:1 tack line for screecher furler
2:1 tack line for spinnaker furler
Colligo Marine Top down spinnaker furling system with anti-torsion rope
All Dynex Dux synthetic standing rigging replaced regularly--currently less than one year old
Mast diamond wires are PBO
Storage bags for all carbon components: rudders, daggerboard, lifting foils, beams, mast, boom

Motor and Trailer
Yamaha 15 HP 2 stroke engine, lighter than any 9.9 hp available (<80 lbs)  w/ custom pivot mount that stores engine forward in aft cockpit for centered weight and no drag

Galvanized steel double axle road trailer
 

Other inventory
Raptor Deck non-skid foam installed in cockpit and cabin- very comfortable to walk on and slip resistant

Lithionics lithium ion battery, 60 amp, with charger and charge controller; battery weighs less than 15 lbs. 
All water-proof switches
Tactic Instruments + Compass w/ CPU + thru-hull transducers, needs a new display + re-wired
Velocitek speedo
Garmin GPS- 7607 touch screen
Standard Horizon VHF w/ masthead Co-ax + AIS capability
MOB pole w/ strobe light mounted in cockpit
Plastimo Survival Sling mounted in cockpit
Dyneema knotless nets w/individual lashings for safety
Porta Potty
Custom Pipe births in cabin
Custom boards to fill in cockpit to make big bed platform
Custom gin pole + mast raising/lowing system- works extremely well

Disclaimer

180 Marine offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.